News

WPC Decking installation method and precautions


WPC materials are used more and more in the outdoor decoration, and become the best material to replace the anti-corrosion wood. Due to its waterproof and anti-corrosion characteristics, it is mainly used for outdoor platforms, such as outdoor flooring and guardrails. So, what is the installation method of plastic wood flooring, and what are the precautions for installation of plastic wood flooring?

1. Preparation before the construction of the plastic wood floor, before the construction, ensure that the concrete base layer of the construction site is leveled. This is very important. I hope that everyone will not save the construction for the sake of saving the situation. Otherwise, everyone will not be able to pay for it.

2. The center distance of the keel is controlled between 310-410mm. The butt joints at the end of the keel need to have a spacing of about 10mm to facilitate drainage. At the same time, the end seams between the keel row and the row are staggered, not in one. On the line. The keel spacing tolerance is <10mm, the flatness is <3mm, and the expansion joint between the wall and the wall is 8-10mm.

3. The construction conditions of the ground floor of the construction site are poor. If the structure of the ground is not stable, the steel keel should be replaced by the steel keel. The galvanized steel should be used. The part of the welded joint should be removed from the rust. .

4. The size of the floor splicing gap should be reasonably determined according to the temperature and humidity of the environment when installing the plastic wood floor, the length of the floor, the moisture content of the floor, and the specific conditions of the laying area.

Plastic wood floor concrete installation process

1. Fixation of the keel

The fixing of the plastic wood keel directly uses the expansion tube to fix the plastic wood keel directly on the ground. The distance between the fixing points of the plastic expansion tube is 500mm~600mm, and the screw nail cap is required to be lower than the surface of the plastic wood keel. Flatter.


2. Assembly of three kinds of floors

This kind of floor is K31-140 plastic wood floor, which is directly fixed on the plastic wood keel with self-tapping screws. The self-tapping screw cap is required to be flush with the surface of the plastic wood floor. The spacing of the plastic wood floor is 5mm. The floor is B22- 140 plastic wood flooring, the self-tapping screws are used to fix the plastic wood floor and the plastic wood keel at the beginning and end of the floor, and the self-tapping screw cap is required to be flush with the surface of the plastic wood floor. The junctions of the other plastic wood floors and plastic wood keels are connected and fastened with plastic buckles and plastic wood keels. The spacing of the wood flooring is determined by the plastic buckle.

The floor is K26-146 plastic wood floor. The self-tapping screws are used to fix the plastic wood floor and the plastic wood keel at the beginning and end of the floor. The self-tapping screw cap is required to be flush with the surface of the plastic wood floor. The junctions of the other plastic wood floors and plastic wood keels are connected and fastened with plastic stainless steel buckles and plastic wood keels. The spacing of the wood flooring is determined by the stainless steel buckle.


Plastic wood floor installation precautions

1. Due to the high density of the plastic wood material itself, the drill hole is required at the position where the self-tapping screws are used, and the self-tapping screws are tightened.

2, the requirements of fixed keel: the installation work surface is required to be flat, no pits, keel spacing L is 300mm ~ 350mm.

3. For the paving of large-area plastic wood flooring, it is recommended to use the graphic installation method. The length of each plastic wood floor should not exceed 2 meters.

4, edge sealing treatment

5. For the paving of curved wooden floor, it is necessary to cut the two ends of each plastic wood floor according to the length and angle of the curve.

6, the step of the plastic wood floor pavement, for the corner of the corner is recommended to use metal bead to protect the plastic wood floor.

7. During the use, please avoid impact or collision of heavy objects. During the storage, transportation and installation of the material, please take care to prevent it from falling from a height and being damaged.

CATEGORIES

CONTACT US

Contact: Mr.Qu

Phone: 13256872068

Tel: 0086-13256872068

Email: changhongwpc@aliyun.com

Add: 1-2-1302,Hongxin Garden, Maidao Road,Qingdao, China